For many years there was just one single efficient way to store data on a pc – employing a hard disk drive (HDD). Having said that, this sort of technology is by now demonstrating its age – hard disk drives are noisy and sluggish; they’re power–ravenous and tend to produce a great deal of heat throughout serious procedures.

SSD drives, on the contrary, are swift, use up much less energy and are much cooler. They provide a whole new method to file access and data storage and are years in advance of HDDs when it comes to file read/write speed, I/O effectiveness and also power efficacy. See how HDDs stand up up against the newer SSD drives.

1. Access Time

Image

After the introduction of SSD drives, file access speeds have gone over the top. Because of the completely new electronic interfaces found in SSD drives, the regular data file access time has shrunk to a record low of 0.1millisecond.

Image

The concept driving HDD drives times back to 1954. And even while it has been substantially polished throughout the years, it’s nonetheless no match for the imaginative technology powering SSD drives. Having today’s HDD drives, the best file access speed you’ll be able to achieve differs between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Resulting from the brand new significant data storage approach embraced by SSDs, they feature better data access rates and quicker random I/O performance.

For the duration of our tests, all of the SSDs demonstrated their ability to handle at least 6000 IO’s per second.

Image

With an HDD drive, the I/O performance progressively raises the more you apply the hard drive. Even so, right after it extends to a particular limitation, it can’t proceed speedier. And because of the now–old concept, that I/O restriction is a lot lower than what you could have with an SSD.

HDD can only go as far as 400 IO’s per second.

3. Reliability

Image

The absence of moving components and rotating disks in SSD drives, as well as the current developments in electronic interface technology have led to a substantially less risky file storage device, having a common failure rate of 0.5%.

Image

As we already have mentioned, HDD drives rely upon rotating disks. And anything that takes advantage of lots of moving parts for extended intervals is liable to failure.

HDD drives’ average rate of failing can vary among 2% and 5%.

4. Energy Conservation

Image

SSDs do not have moving parts and need almost no cooling down power. They also involve not much power to function – trials have indicated that they’ll be operated by a standard AA battery.

In general, SSDs consume amongst 2 and 5 watts.

Image

HDD drives are famous for getting noisy. They need far more power for air conditioning purposes. On a hosting server that has several HDDs running all of the time, you need a great number of fans to make sure they’re cool – this will make them a lot less energy–economical than SSD drives.

HDDs take in somewhere between 6 and 15 watts.

5. CPU Power

Image

Because of SSD drives’ greater I/O performance, the leading server CPU can work with data demands a lot quicker and save time for additional functions.

The regular I/O wait for SSD drives is 1%.

Image

HDD drives enable reduced accessibility rates in comparison to SSDs do, resulting in the CPU being required to hang on, whilst arranging resources for your HDD to uncover and give back the required data.

The regular I/O delay for HDD drives is about 7%.

6.Input/Output Request Times

Image

The bulk of WebDomainiacs.com’s brand new machines now use merely SSD drives. Each of our lab tests have demonstrated that with an SSD, the typical service time for any I/O request whilst doing a backup remains under 20 ms.

Image

During the same tests with the same hosting server, now fitted out utilizing HDDs, efficiency was noticeably reduced. During the hosting server data backup procedure, the typical service time for I/O demands fluctuated somewhere between 400 and 500 ms.

7. Backup Rates

Image

A different real–life improvement will be the speed at which the back–up has been produced. With SSDs, a server back–up today can take under 6 hours using WebDomainiacs.com’s web server–enhanced software.

Image

Through the years, we’ve got employed mainly HDD drives with our servers and we’re familiar with their overall performance. With a server loaded with HDD drives, a complete web server backup normally takes about 20 to 24 hours.

With WebDomainiacs.com, you can get SSD–equipped web hosting services at the best prices. The Linux web hosting packages feature SSD drives automatically. Apply for an account with WebDomainiacs.com and experience the way your web sites will become much better straight away.


  • Service guarantees

  •  
  • Join us now. There aren’t any installation charges you’ll also find complete root/administrator access to the server. 99.9% network availability is guaranteed.
  • Compare our prices

  •  
  • Effortlessly compare the parameters and features supplied by WebDomainiacs.com’s Virtual Private Servers. Find out which VPS Hosting package provides you with exactly what you will want to deal with your dynamic online presence easily.
  • Compare our hosting plans
  • Contact Us

  •  
  • It is easy to get in contact with us 24x7x365 by email or by making use of our super–fast ticketing system. We provide a 1–hour reply–back time frame warranty.